Insulate your floors and ceilings during your renovation, and you will reduce your home's heating and cooling costs by up to 45% and significantly increase your overall comfort in the long-term.
Ensure that you read our insulation health and safety tips before considering installation or repair or insulation. Learn to minimise risk to yourself and your property.
There are two main types of insulation – bulk insulation and reflective foil insulation. If you are removing the internal lining of your walls, there is a range of insulation batts that may be suitable for your wall insulation, including polyester, glass wool, rock wool and natural wool.
Extruded or expanded polystyrene insulation boards can also be used in underfloor insulation. This type of insulation can also be combined with reflective foil to form a blanket that helps create an insulated barrier from the outside air.
The R value is a measure of a material's resistance to heat flow (known as thermal resistance). The higher the R value, the greater the resistance to heat transfer, the greater the insulating effect and the greater the energy (and therefore money) savings. Different products with the same R value will provide similar insulation performance, regardless of thickness or the type of material.
For the Victorian climate the recommended R value for floor insulation is R2, with a minimum requirement of R1.
Insulation batts should be installed snugly in between the timber floor joists. The batts can be held in place with tape if needed, or a layer of reflective foil can be installed (shiny side down) to achieve a greater benefit.
If the insulation will cover underfloor ducts for heating systems, ensure that the performance of the ducts is not impeded by the installation of the insulation.
Most insulation products will provide a certain level of sound reduction as well as thermal insulation. Good acoustic performance could be important if you have a problem with external noise, as sound can enter the home from unsealed underfloor spaces. Heavier insulation products like rock wool tend to have the best sound reduction performance for a given width.
Some products offer better strength and rigidity, encouraging a snug fit between the timber floor joists. Consider using these products for your underfloor insulation.
Carpet and rugs can add an insulating barrier between you and the cool air under your house in winter.
Thermal mass from a concrete slab can be effective in winter due to its ability to store heat during the day and release it later. Thermal mass stores heat, either from direct solar radiation or by absorbing heat from the air.
If you are creating a new concrete slab as part of your renovation, be sure to:
Installing insulation carries potential risks and requires expert knowledge. Poor installation of insulation will affect its performance and your potential cost savings so it's important to ask the right questions of your installers.
Various Australian standards and national codes of practice cover the installation of insulation products. For more information visit the Insulation Council of Australia and New Zealand (ICANZ) website
“Working together, we pledge to play our part and take action on climate change for Victoria, our country and our planet.”
Join thousands of others already playing their part to help keep the temperature rise under two degrees, so we can avoid the worst of climate change.
We can make a difference, if we all act today for a better tomorrow.
Connect with us on social media or sign up to our newsletter
Parks are a perfect place to experience Australian nature and reconnect with friends and family. Find a park within 1.5 hours of Melbourne here:...
The 50th Victorian business to be awarded an SV Energy Assessment Grant has been congratulated by Minister for Energy, Environment & Climate Change,...
Receive monthly emails about the latest news & events